national-laser-company

  • 210 Argon Laser

210 Air-Cooled Argon Laser System

210 Laser Design

The 210 argon laser has been engineered to meet today’s most demanding needs in OEM applications. Offered in an industry standard rectangular package, the 210 provides unparalleled beam quality that is constant across output power levels and through fiber delivery systems. The 210 is also available with a remote cooling option for applications where fan vibration is a concern. The 210 also offers improved thermal stability, longer life and exceptionally low noise.

Quality

The 210 draws upon years of experience and proven results with major OEM’s worldwide. Utilized in life science, image recording and research applications, the 210 has effectively proven to reduce warranty retuns and increase lifetimes. The laser incorporates the latest in internal mirror tube technology assuring permanent beam alignment and eliminating contamination. NLC’s design permits ease of servicing and simple, drop-in laser tube replacement.

Special Notes

1. Specifications subject to change without notice.

2. When used with 9400 series or NLC 2200 series power supply.

3. Measurements taken in light control after 5 minute warm-up.

4. Nominal air flow is 65 CFM. Use McLean Engineering Model INB412 or equivalent fan rated for 185 CFM free air flow and 1.8 inches of water. Hose length not to exceed two meters.

5. Large fan required for 30, 20, & 65mW @ 488, 514, & 458-514nm options.

PDF Downloads

210 Argon Laser Spec Sheet

210 Argon Laser User Manual 

210H-air-cooled-argon-laser-photo